2
EXPLANATION OF SYMBOLS
The term “WARNING!” indicates instructions regarding personal safety. If the instructions are not followed, the result may be bodily
injury or death.
The term “CAUTION!” indicates instructions regarding possible damage to physical equipment. If these instructions are not followed, it
may result in damage to the equipment that may not be covered under the warranty.
The term “IMPORTANT!” indicates instructions or information that are vital to the successful completion of the procedure.
The term “NOTE” is used to indicate additional useful information.
NOTE:
The intent of the lightning flash with arrowhead symbol in a triangle is to alert the user to the presence of un-
insulated “dangerous” voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of
electric shock to humans.
NOTE:
The intent of the exclamation point within an equilateral triangle is to alert the user to the presence of important
safety, and operating and maintenance instructions in this manual.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth. See the Maintenance and Repair section for more cleaning instructions.
7. Do not block any ventilation opening. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce
heat.
9. Only use attachments/accessories specified by the manufacturer.
10. Refer all servicing to qualified service personnel.
11. Adhere to all applicable local codes.
12. Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment installation.
Maintenance and Repair
Cleaning
WARNING!:
Liquids entering the housing may damage the internal electronics. Keep liquids away and do not use
any solvents or chemicals to clean this product.
Clean the chassis only with a soft, slightly damp or dry cloth.
• The display screen may be cleaned with a damp cloth using water only. Water should be applied to the cloth only. Never spray or
apply liquids on or near the product.