5
Figure 3: FB2082-i Array Frame
1- Shackle holes (accept 3/4” (20 mm) screw pin anchor shackle)
2- Center support bar
3- Rigging plates
4- Rigging plate retaining bolts
5-Rigging plate attachment holes
Figure 4: PB2082-i Pull Back Bar
1- Shackle hole (accepts
5/8” (16 mm) screw pin anchor shackle)
2- Rigging plate attachment holes
3- Rigging plates
4- Rigging plate retaining bolts
Figure 5: EB2082-i Extension Bar
1- Extension bar
2- Rigging plate retaining bolts
3- Shackle holes (accept 3/4” (20 mm) screw pin anchor shackle)
4- Rigging plates
Use only shackle holes for
suspension of array!
Use only shackle hole for
suspension of array!
Use only shackle holes
for suspension of array!
Introduction (continued)
