19
Preliminary Specification
Relay Outputs
2 discrete floating relay switch outputs
Connector Type
3-pin "Phoenix Style" (a.k.a. "Euro Style") detachable terminal blocks
Configuration
Electromechanical Relay
Pinout
1:NC 2:NO 3: COM
Switching Capacity (nom)
1A 30VDC
Logic Outputs
4 discrete outputs
Connector Type
2-pin "Phoenix Style" (a.k.a. "Euro Style") detachable terminal blocks
Configuration
Single-ended, TTL compatible
Pinout
1:+(Signal) 2:-(CHASSIS GND)
Omni Inputs
6 discrete inputs for TTL logic, voltage control or passive resistive
Connector Type
2-pin "Phoenix Style" (a.k.a. "Euro Style") detachable terminal blocks
Configuration
Single-ended, ground referenced
Pinout
1:+(Signal) 2:-(CHASSIS GND)
Normal Operating Range
Reads signals between 0-5V nominally
Potentiometer Operation
Use 10K for full range
Voltage Tolerance
+/- 48V
Current Output
0.5mA with 10K pot (for passive resistive controls)
RS-232 Port
Female DB9 Connector
QSControl.net
Neutrik Ethercon RJ45 Ruggedized Data Connector
Indicators
QSControl.net Status
Yellow Link, Tx, Rx, front panel / Green Link, Tx, Rx, rear panel
Power
Blue, front panel
Diagnostic
Red, front panel
LCD Data Display
2 line x 16 character, backlit, front panel
Signal Presence
Tri-state (red, green, yellow), front panel
Dimensions
18.89” (479.8mm) W x 1.73” (43.9mm) H x 15.00” (381.1mm) D
Weight
9.94 lb. (4.51 kg)
Specifications are subject to change without notice.
