Attero Tech by QSC
Axiom Product Family
User Manual
QSC, LLC 2020
614-00063
ARCHITECTS & ENGINEERS SPECIFICATION
ML1
The single gang mount interface unit shall have two potentiometers on the front panel for gain control of the 3.5mm input and the balanced
input independently.
The unit shall have a 3.5
mm stereo consumer level input and a ¼”/XLR combo Mic/Line input.
This input is amplified and sent to the Axiom
bus. The XLR input shall be dedicated for dynamic microphone signals, while the ¼” input may be used to interface balanced li
ne level audio
sources to the Axiom bus.
The unit shall have a selector switches for audio channel routing on the top of the unit.
There shall be two bi-color signal presence and level indicator LEDs on the front of the unit. One for the balanced input and one for the
3.5mm input.
The unit shall have two 8P8C RJ45 type connectors on the back side of the unit.
The unit shall support daisy chain of up to 1 other Axiom device, using 2 RJ45 (8P8C style connectors) for connectivity to CAT-X cabling.
The device shall support mounting the mounting of multiple units side by side in a multi-gang wall box or one unit in a single gang US wall
box.
The unit shall be the Attero Tech Axiom ML1.
USB1
The single gang mount interface unit shall have a USB type-B connector on the front panel for connecting to PC or Mac.
The unit shall have software switchable options for 1x1, 2x0, or 1x0 audio routing. This audio is sent over the Axiom bus.
The unit shall have selector switches for audio channel routing on the top of the unit.
The unit shall have a USB mini type-B connector for software configuration of the unit.
There shall a single bi-color status LED on the front of the unit.
The unit shall have two 8P8C RJ45 type connectors on the back side of the unit.
The unit shall support daisy chain of up to 1 other Axiom device, using 2 RJ45 (8P8C style connectors) for connectivity to CAT-X cabling.
The device shall support mounting the mounting of multiple units side by side in a multi-gang wall box or one unit in a single gang US wall
box.
The unit shall be the Attero Tech Axiom USB1.
BT1
The single gang mount interface unit shall have a 3.5mm stereo consumer level TRRS input/output and a Bluetooth® 3.0 compatible audio
receiver/transmitter in a Decora form factor. These inputs/outputs are sent to the Axiom bus.
The unit shall support media and/or call bridging functionality via Bluetooth® connection.
The unit shall have selector switches for audio channel routing on the top of the unit.
The unit shall have a USB mini type-B connector for software configuration of the unit.
There shall be two bi-color signal presence and level indicator LEDs on the front of the unit. One for the balanced input and one for the
3.5mm input.
The unit shall have two 8P8C RJ45 type connectors on the back side of the unit.
The unit shall support daisy chain of up to 1 other Axiom device, using 2 RJ45 (8P8C style connectors) for connectivity to CAT-X cabling.
The device shall support mounting the mounting of multiple units side by side in a multi-gang wall box or one unit in a single gang US wall
box.
The unit shall be the Attero Tech Axiom BT1.
