Attero Tech by QSC
Axiom Product Family
User Manual
QSC, LLC 2020
614-00063
–
BT1
–
Status LEDs
The BT1 is equipped with a single LED indicator above the pairing
button. The following chart indicates the available LED status
information:
LED State
Status
White
Idle
Flashing Blue
Discoverable/Pairing Mode
Blue
Connected
Red
Initializing
Green
AUX jack connection detected
Flashing White
Identify
Flashing Purple
RSSI value of active Bluetooth® ≤
-90
–
BT1
–
Device Config & Workflow
The BT1 may be configured for single use, or daisy-chained with
one other Axiom device.
The default configuration is for single device use with Port B
disabled and Ch2 transmitting via Port A.
Figure 15
–
Switch/Label Config Options
–
BT1
–
Device Settings
The BT1 is designed use in a number of configurable modes to
facilitate comprehensive use in professional AV applications. The
following sections describe the available modes and their
functionality.
–
Bluetooth® Pairing/Connect Modes
4.3.1.1
–
Manual Mode
This usage model is intended for applications where casual users
of a public venue (sports bar, spa, stadium luxury box, fitness
center) have access to connect their devices to the audio system
but headaches are minimized by eliminating automatic reconnect
and pairing history features.
In this mode, users connect their Bluetooth® audio enabled smart
device by simply pressing the front panel “PAIR” button. The
status LED will begin flashing blue to indicate that the BT1 is now
visible to other Bluetooth® devices and accepting pairings. This
pairing period lasts 60 seconds after which the status LED will
stop flashing and turn off and the BT1 will disable its Bluetooth®
interface.
*Note:
The default Bluetooth friendly name visible to other
devices is “
BT1-xx:xx:xx
”. This name can be customized by the
installer using the unIFY Control Panel software.
If a successful pairing is made during the pairing period, the
status LED will stop flashing and turn constantly on.
To disconnect a Bluetooth device from the BT1, press and hold
the PAIR button for 5 seconds and then release it. The status LED
will turn off, and the connection will be reset. Another device may
now be connected by repeating the pairing process.
4.3.1.2
–
Reconnect Mode
In this mode, the BT1 maintains a pool of the last 10 paired
devices and any previously paired device on that list will be
permitted to reconnect when in range of the BT1 without
requiring the front panel button to be pressed. The user simply
selects the BT1 friendly name on their smart device.
Any new devices that are paired are added to the paired device
list. If the list already full, a random device from the list will be
removed and the new device added in its place.
4.3.1.3
–
Exclusive Mode
This mode is intended for restricted/personal use and works
similarly in operation to reconnect mode. However, rather than
allow any known device from the pairing list to reconnect, only a
specific device can be used with that particular BT1.
To setup a device as the exclusive device, set the BT1 to
“Exclusive” mode, clear the pairing list, and then pair the desired
exclusive device to the unit. The BT1 makes a note of this device
and from that point on, only that exclusive device will be allowed
to reconnect to that particular BT1 when in range. As with the
reconnect mode, reconnection is done without requiring the front
panel button to be pressed by simply selecting that particular BT1
on their smart device.
Once the BT1 has been associated with a device, both the front
panel pair button and the remote “pair” command sent via the
network are disabled and will have no effect.
