54
Copyright@2004~2014 Qsan Technology, Inc. All Rights Reserved.
Qsan Document – User Manual
。
BBM supports hot pluggable. Regardless of the system is turned on or off.
。
Remove the cover of BBM.
。
Insert the BBM.
。
Tighten the BBM and use screws to lock the both sides.
At the rear, check that the Master Controller is in its slot (CTRL 1).
If desired, install the optional Slave Controller in its slot (CTRL 2, only for dual-controller).
CAUTION:
When running on dual controller mode, please make sure both controllers have
the same DIMM on each corresponding memory slot. Failing to do so will result
in controller malfunction, which will not be covered by warranty.
Install the Rail Kit onto the unit and insert it into the rack.
CAUTION:
The system is very heavy. It’s recommend that a mechanical lifter or at least
two persons be used to raise and align the system to prevent injury during
installation. Use care when inserting or removing a system into or out of a rack
to prevent the accidental tipping or the rack causing damage or personal injury.
Install the Disk Drives.
Connect the management port cable and data port cables on the network plan, the topology
examples are on the following.
