104
Copyright@2004~2014 Qsan Technology, Inc. All Rights Reserved.
Qsan Document – User Manual
2.
Enter a
RAID Name
for the RAID group.
3.
Select a
RAID Level
from the drop-down list.
4.
Click the
Select Disks
button to select disks from either local or expansion JBOD systems, and
click
OK
to complete the selection. The selected disks are displayed at
RAID Disks
.
5.
Optionally, configure the following:
。
Preferred Controller:
This option is only visible when dual controllers are installed. The
default value is Auto.
。
Thin Provisioning:
This option is only visible when thin provisioning feature is enabled.
The default value is Disabled.
。
Write Cache:
It’s to enable or disable the write cache option of hard drives. The
default value is Disabled.
。
Standby:
It’s to enable or disable the auto spin down function of hard drives, when this
option is enabled and hard drives have no I/O access after certain period of time, they
will spin down automatically. The default value is Disabled.
。
Read-Ahead:
It’s to enable or disable the read ahead function. The default value is
Enabled.
。
Command Queuing:
It’s to enable or disable the hard drives’ command queue function.
The default value is Enabled.
6.
At the confirmation dialog, click
OK
button to create the RAID group.
TIP:
In
AegisSAN Q500
,
AegisSAN V100
and
AegisSAN LX
, the maximum
number of physical drives in a RAID group is 64.
