Qsan Technology XCubeNXT XN8012D, Руководство по оборудованию

Страница: 51 / 69

47

Blue flashes: the disk data is being
accessed.

Off: no disk drive is inserted.
6 Disk Drive Status LED

Off: the disk drive is healthy.

Amber : the disk drive has read/write error.

Amber flashes (interval of 0.5 sec): the disk
drive is rebuilding.

Amber flashes (interval of 0.05 sec):
identify a specific disk drive.
7 Controller Status LED

Green : The controller status is normal.

Red : The system is booting, or the controller
failed.
8 Master / Slave LED

Always showing green light.
9 Unit Identification (UID)
LED (rear panel)

Blue : the system has been identified.

Off: the system has not been identified.
10 1G LAN Port Speed (Left):

Amber : 1000Mbps connection.

Green : 100Mbps connection.
Activity/Link (Right):

Light OFF: No connection.

Light ON: Connected to the internet

Light flashes: when data is being accessed.
11 10G LAN Port
10G dual port connector embedded 2 LEDs:
Left LED/Right LED

Left LED to indicate upper port.

Right LED to indicate lower port.

Amber flashes: when accessing.
12 PSU LED

OFF: No AC power to power supplies / AC
present.

Green : PSU is on and OK.

Green flashes: PSU is off, 5VB is on.

Amber : Power supply failure for main
output.

Amber flashes : Power supply showing
warning event such as high temperature or
high power.