Qsan Technology XCubeNXT XN8012D, Руководство по оборудованию

Страница: 50 / 69

46 © Copyright 2018 QSAN Technology, Inc. All Rights Reserved.
Power LED

White : power is ON (at least one power
supply unit is supplying power to the
system).

White flashes every 0.5 sec: the system is at the
stage of starting up or shutting down, or the
storage is not configured.

Off: the system is shutdown.
2 Unit Identification (UID)
Button/LED (front panel)
UID (Unique Identity) button

Press the button one time to turn it ON;
press it again to turn it OFF.
UID (Unique Identity) LED

Blue : the system has been identified.

Off: the system has not been identified.
3 Enclosure Access LED (Indicate the host interface connectivity.)

Blue flashes: the host interface activity is on-
going.

Off: no host interface activity.
Note: This behaviour does not include 1G port’s activity.
4 Enclosure Status LED (Indicate current health status of the system.)

Amber : 1) The storage folder/pool has reached
its full capacity (100%). 2) The storage
folder/pool is going to be full (95%).
3) The system fan is out of function. 4) A bad
sector is detected on the hard disk drive. 5) One
of the pool is in degraded read-only mode. 6)
Hardware self-test error.
e.g. PSU failed, abnormal voltage, the
temperature is at critical high/low, any cooling
fan module failed or removed, any pool failed or
the UPS is running on batteries.

Amber flashes every 0.5 sec: firmware is
upgrading, or RAID rebuilding is in a
process.

Off: the system is healthy.
5 Disk Drive Power LED

Blue : the disk drive is inserted and no data
access.