QRS Presto Digitation 73200, Инструкция по установке и эксплуатации

Страница: 14 / 16

Page 14 Presto Digitation Installation Manual
CC Function
The top version of the SV series features this handy function which allows the user to
assign a control change code to any of the pedals (soft, sustaining or damper). The
procedure for assigning the code to the pedal is as follows:
•
Press MIDI to enter programming
•
Press the CC button, associated with the ambience button. The relative LED will light
up.
•
Now press the pedal that is to be assigned the control change code number.
•
While holding the pedal, press the key on the keyboard corresponding to the chosen
CC number.
•
Release the pedal and press the MIDI button again to exit programming.
Now, whever the pedal is pressed, both its own code (e.g., damper -CC64) and the code
assigned through programming will be transmitted.
Local On/Off
If all the effects are turned off, the device will go into LOCAL OFF mode and will then
operate as a master-keyboard. It will transmit all MIDI messages (PG, CH, CC, etc.)
without emitting any form of sound. If desired, the internal sound module can be
controlled from an external master (Computer, Sequencer, etc.), placing all of the internal
sounds at the user's disposal. To exit this function, simply call up any sound from the
panel, and the device will again operate as a normal piano.
M I D I F
U N C T I O N S
Ac. Bass El. Piano 1 El. Piano 2 Pipe Vibes Strings
El. Bass Piano 1 Piano 2 Piano 3 Harpsi On/Off
Presto-Digitation
Hall Stage Room Ambience Transposer Demo
Chorus Flanger Tremolo Rotary Dyn Sens MIDI
Min Max Mellow Bright Min Max Min Max
Master Volume Brilliance Strings Volume Effects Parameters
TX RX PG CC MODE MIDI