QRS Presto Digitation 73200, Инструкция по установке и эксплуатации

Страница: 13 / 16

Page 13
Presto Digitation Installation Manual
M I D I F
U N C T I O N S
MIDI
By pressing the MIDI button, we can edit the various MIDI functions, starting with
selection of the communication channels for receiving (rx) and transmitting (tx) data.
TX/RX Function
Operation is simple: Press Receive or Transmit, depending on whether you want to
select a channel for receiving or transmitting data. The relative LED will light up. At
this point, give the channel a number by pressing the appropriate key on the keyboard,
referring to the number markings.
Note: If the button marked OMNI ON is pressed, the instrument can receive on any
channel. If the OFF button is pressed, it doesn't transmit or receive any MIDI
information
PG Function
With this button, a program change code can be manually sent to one of the external
unit's regardless of the mode set-up status explained below. The procedure is similar to
the above. Each key is assigned a program change number, so to send PG No. 4, for
example, we have to press (in this order):
-MIDI button (To enter MIDI Edit.)
-PG button (The LED will light up.)
-The first C on the left of the keyboard, which is the fourth key and corresponds to PG
No. 4 (At this stage the PG LED will go out, confirming that selection has been made.)
If we are satisfied with the selected sound, we press the MIDI button again to exit
Editing and return to Play. If not we repeat the same operations in the above order to
select another program change.
Ac. Bass El. Piano 1 El. Piano 2 Pipe Vibes Strings
El. Bass Piano 1 Piano 2 Piano 3 Harpsi On/Off
Presto-Digitation
Hall Stage Room Ambience Transposer Demo
Chorus Flanger Tremolo Rotary Dyn Sens MIDI
Min Max Mellow Bright Min Max Min Max
Master Volume Brilliance Strings Volume Effects Parameters
TX RX PG CC MODE MIDI