QRPKits Hendricks PFR-3B, Руководство пользователя

Страница: 2 / 20

Assembly notes:
●
There is no need to print out the whole assembly manual which would use up a lot of ink. Hopefully you
have a laptop or similar you can view these instructions on at the work bench.
●
Do print the over all parts placement diagram to use as reference as you build. For experienced builders,
that is likely all you'll need for most of the assembly.
● Pre-sorting the resistors and capacitors can speed up the assembly and reduce mistakes.
● Parts will be installed in order of height, starting with resistors. This way taller parts don't get in
the way had they been installed first.
● The placement diagrams highlight the parts to be installed. To reduce clutter on the diagram, parts
already installed or to be installed at a later step are not shown, with the exception of a few things
for reference.
● Parts are numbered on the board starting at the lower right hand corner. Numbers run bottom to top, then
right to left across the board.
● Missing or lost parts? Contact QRPKITS.com for replacements.