9
Important Tips:
(Please Read)
1.
The clock can display in either 12 or 24 hour display format. In 12hr mode PM
is represented by (PM) on the bottom of left corner.
2.
There is no setting allowed to set when the
FOOD TRAY
is rotating.
3.
Under
Clock Display Mode
the colon icon
(:)
will flash.
4.
Under the
Feeding Timer Display Mode
, there are 3 digits will show up.
1
st
Digit
(1, 2, 3, 4, 5 &6) is feeding number and also shows the number of Food Trays.
2
nd
Digit & 3
rd
Digit
indicate the feeding time in hours.
5.
The
BELL
icon (
) will show on the upper of right corner of LCD display while
the feeding timer starts.
6.
Under
Feeding Timer Display Mode
, a solid
BELL
icon (
) means the feeding
time has already passed; a flashing
BELL
icon means the feeding time has not
been reached yet.
7.
If the time for the next feeding is set earlier than the present feeding time, the
feeding will start the next day.
8.
Under the
Current Time Setting Mode
, Press and hold
MODE
key for 2 seconds,
the
Hour Number
and
Minutes Number
will rapidly increase until you release
the key. When the number reaches its maximum, the number will back to the
minimum and start increasing again.
9.
If the feeding timer has begun already, press and hold the
START NOW
key, the
FOOD TRAY
will rotate back to the 1
st
Tray and the timer will begin from the 1
st
feeding time again.
10.
If
START TOM
key is pressed. Both the
BELL
(
) and
Zz
(
) icon will show on
the LCD display. The
Zz
(
) icon will turn
OFF
at 0:00 (midnight) to indicate the
timer has started.
11.
START TOM
(Start Tomorrow) should use by you only want to set the feeder
today and start the feeding time next day (tomorrow).
12.
When
RED (LOW BATT) Indicated Light FLASHES
, the batteries are low and must
be replaced. Change all the batteries as soon as possible. You need to reprogram
all your settings after you replace the batteries.
13.
Training tips: some pet may require a special adjustment period to acclimate to
their new automatic feeder. If your pet need a special adjustment period, follow
these steps:
•
Place the 6 meals timed automatic feeder next to your pet’s existing bowl
or feeder.
•
Place food in the food tray of 6 meals timed automatic feeder (allow for a
period of time to adjustment)
•
Keep food in the pet’s current food bowl. (allow for a period of time to
adjustment)