9
Important Tips:
(Please Read)
1.
The clock can display in either 12 or 24 hour display format. In 12hr mode PM
is represented by (PM) on the bottom of left corner.
2.
The clock setting & mode setting are not allowed to set when the
FOOD TRAY
is
rotating.
3.
Under
Clock Display Mode
the colon icon
(:)
will flash.
4.
Under the
Feeding Timer Display Mode
, there are 3 digits will show up.
1
st
Digit
(1, 2, 3, 4, 5 &6) is feeding number and also shows the number of Food Trays.
2
nd
Digit & 3
rd
Digit
indicate the feeding time in hours.
5.
The
BELL
icon (
) will show on the upper of right corner of LCD display while
the feeding timer starts.
6.
Under
Feeding Timer Display Mode
, a solid
BELL
icon (
) means the feeding
time has already passed; a flashing
BELL
icon means the feeding time has not
been reached yet.
7.
If the time for the next feeding is set earlier than the present feeding time, the
feeding will start the next day.
8.
Under the Current Time Setting Mode, Press and Hold MODE key for 2 seconds,
the Hour Number and Minutes Number will rapidly increase until you release the
key. When the number reaches its maximum, the number will back to the
minimum and start increasing again.
9.
If the feeding timer has begun already, press and hold the
START NOW
key, the
FOOD TRAY
will rotate back to the 1
st
Tray and the timer will begin from the 1
st
feeding time again.
10.
If
START TOM
key is pressed. Both the
BELL
(
) and
Zz
(
) icon will show on
the LCD display. The
Zz
(
) icon will turn
OFF
at 0:00 (midnight) to indicate the
timer has started.
11.
START TOM
(Start Tomorrow) should use by you only want to set the feeder
today and start the feeding time next day (tomorrow).
12.
When
RED (LOW BATT) Indicated Light FLASHES
, the batteries are low and must
be replaced. Change all the batteries ASAP. You need to reprogram all your
settings after you replace the batteries.
Made in China
