Firewall - IP Filtering
Entries in this table are used to restrict certain types of data packets from your local network to Internet through the
Gateway. Use of such filters can be helpful in securing or restricting your local network.
Item
Description
Enable IP Filtering
Click to enable the IP filtering security function.
Local IP Address Protocol
Comments
To restrict data transmission from local network on certain IP
addresses, fill in the IP address and the protocol, also put
your comments on it.
The
Protocol
can be TCP, UDP or Both.
Comments
let you know about whys to restrict data from the
IP address.
Apply Changes
Click the
Apply Changes
button to complete the new
configuration setting.
Reset Click
the
Reset
button to abort change and recover the
previous configuration setting.
Delete Selected
Click to delete the selected port range that will be removed
from the IP-filtering list.
Delete All
Click to delete all the registered entries from the IP-filtering
list.
Reset Click
the
Reset
button to abort change and recover the
previous configuration setting.
