WDS Settings
Wireless Distribution System uses wireless media to communicate with other APs, like the Ethernet does. To do this,
you must set these APs in the same channel and set MAC address of other AP that you want to communicate with in
the table and then enable the WDS.
Item
Description
Enable WDS
Click the check box to enable wireless distribution system.
MAC Address
Fill in the MAC address of AP to register the wireless distribution system
access capability.
Data Rate
Select the transmission data rate from pull-down menu.
Data rate can be auto-select, 1M to 54Mbps or MCS.
Comment
Fill in the comment tag for the registered AP.
Apply Changes
Click the
Apply Changes
button to complete the new configuration
setting.
Reset
Click the
Reset
button to abort change and recover the previous
configuration setting.
Set Security
Click button to configure wireless security like
WEP(64bits),
WEP(128bits), WPA(TKIP), WPA2(AES)
or
None
Show Statistics
It shows the TX, RX packets, rate statistics.
Delete Selected
Click to delete the selected clients that will be access right removed from
this WLAN Broadband Router.
Delete All
Click to delete all the registered clients from the access allowed list.
Reset Click
the
Reset
button to abort change and recover the previous
configuration setting.
