- 15 -
Objects situated between the visualizer and the infrared remote control and a weak battery
may interfere with the reception.
●
Installing visualizer software
This function is to snap and display images with the USB interface, which includes displaying
static and dynamic pictures, snapping dynamic images and playback the dynamic images
with the Windows Media Player or its own player.
A.
Insert the CD-ROM that comes with the visualizer into the CD-ROM drive. If Auto run
is enabled on your system, then the Software Setup window will be displayed
automatically as below.
If it does not start automatically, after inserting the CD-ROM, Click [Start] [My Computer],
and double click
(the CD-ROM drive letter might be different in different computer
systems), and then the above screen will appear immediately.
B.
Click the Capture Program file to install the program that captures images in the AVI or
JPG format.
C.
Click the Code-Writing Program file to install Code-Writing Program.
D.
Shut down your computer when prompted in order for the changes to take effect.
E.
Use the USB2.0 cable provided to connect your computer to the visualizer before
your computer is restarted.
USB Port
The USB port can be used to store still images from the visualizer in a computer. Connect the
visualizer to your computer with the supplied USB cable. The visualizer software is available
on the supplied CD-ROM.
* Please pay attention to the following:
1.
Computer hardware requirement: CPU: 2.4GHz, RAM: 256M or above, Graphic card 64M,
USB 2.0 port, Hard disk 40G or more, Monitor display resolution higher than XGA (1024x768).
2.
Operating system: Windows XP SP2 ，Win7.
3.
Must use a high-speed USB 2.0 cable provided .
4.
When connecting the visualizer to a desktop computer with the high-speed USB 2.0
cable provided, we recommend using the USB port located on the rear of the
mainframe. The USB port on the front of the computer might have interference.
