- 11 -
Basic Operation
●
PAL/NTSC video outputs
You can set PAL or NTSC mode in the setting menu.
●
Working on the stage
1.
Place your material on the platform.
2.
Select the enlargement required using the “ zoom In/zoom out ” knob.
3.
Adjust the focusing the “ AUTO ” button.
●
Working outside the stage
To show a 3-dimensional object using the visualizer, place the object on the
working surface and adjust the “ zoom In/out ” and “ AUTO ” keys. If
the object is too large for the stage or if you would like to show it from one of its
side, or a different angel, just
place the object behind or in front of the unit and manually tilt the camera head
(remove the close-up lens prior to titling the camera head).
Rotate 330 degrees vertically
●
Light
