bracket.)
5. Place sensor with arm on mounting bracket. Adjust the horizontal positioning of the sensor to point towards the
desired coverage area.
6. Secure the mounting arm location by sliding lock pin into the hole. Use the washer and remaining small screw to
secure the lock pin by screwing upwards through the bottom of the hole in the mounting bracket.
7. Set PIR Sensitivity Settings – 3 options that can be set through the panel or on the dealersite:
8. Verify and Test Image Sensor Setup
https://answers.alarm.com/Installation_and_Troubleshooting/Image_Sensor/Qolsys_IQ_Panel_2_Image_Sensor/Qolsys_IQ_Panel_2_Image_Sensor_Installation_Guide_-_ADC-IS-300-LP
Updated: Tue, 17 Apr 2018 13:46:50 GMT
11
