QNO FQR7200, Руководство пользователя

Страница: 61 / 184

Multi-WAN Router
58
then in the boxes of “Source IP” input “192.168.1.0 ~ 0” (which means to include all Intranet IP
addresse
s). Retain the original numbers “0.0.0.0” in the boxes of “Destination IP” (Which means to
include all Internet IP addresses). Select WAN2 from the pull-
down option list “Interface”, and then click
“Enable”. Finally, click “Add New” and the rule will be added to the mode. After the rule is set up, only
packets that go to Port 80 will be transmitted through WAN2, while other traffics will be transmitted
through WAN1.
Example 2:How do I configure Protocol Binding to keep traffic from all Intranet IP addresses from going
through WAN2 when the destinations are IP 211.1.1.1 ~ 211.254.254.254 as well as the whole Class A
group of 60.1.1.1 ~ 60.254.254.254, while traffic to other destinations goes through WAN1?
As in the following figure, there are two rules to b
e configured. The first rule: Select “All Port
[TCP&UDP/1~65535]” from the pull-down option list “Service”, and then in the boxes of “Source IP”
input “192.168.1.0 ~ 0” (which means to include all Intranet IP addresses). In the boxes for “Destination
IP” input “211.1.1.1 ~ 211.254.254.254”. Select WAN2 from the pull-down option list “Interface”, and