QNO FQR7200 Скачать руководство пользователя страница 33

Страница: 33 / 184

Multi-WAN Router

through this WAN will be disconnected too. Only after the disconnected

lines are reconnected can they go through the standby system to connect

with the Internet. Therefore, to avoid a huge number of disconnections,

users can activate this function to arrange new connections through

another WAN to the Internet. In this way, the effect of any disconnection

can be minimized.

Line-Dropped

Period

Input the time rule for the disconnection of this WAN service.

Line-Dropped

Scheduling

Input how long the WAN service may be disconnected before the newly

added connections should go through another WAN to connect with the

Internet.

Link Backup

Interface

Select another WAN port as link backup when port binding is configured.

Users should select the port that employs the same ISP.

Shared- Circuit WAN

environment

If your WAN connects to a Switch, select “Enabled” to filter broadcast

packets. The default is “Disabled”.

MTU:

MTU is abbreviation of Maximum Transmission Unit. “Auto” and “Manual”

can be chosen. The default value is 1500. Different value could be set in

different network environment. (e.g. ADSL PPPoE MTU: 1492)

The default is “Auto”.

After the changes are completed, click

“Apply”

to save the configuration, or click

“Cancel"

to leave

without making any change.

PPTP

This option is for the PPTP time counting system. Input the user’s connection name and password issued

by ISP, and use the built-in PPTP software to connect with the Internet.

Содержание FQR7200

























































































































































































Результаты поиска

Содержание FQR7200

Отзывы:

Похожие инструкции для FQR7200

Бренды по названию

Популярные бренды

QNO FQR7200, Руководство пользователя

Результаты поиска

Содержание FQR7200

Отзывы:

Похожие инструкции для FQR7200

Бренды по названию

Популярные бренды