QNAP TS-AI642 Скачать руководство пользователя страница 43

Страница: 43 / 62

4. NAS Migration

You can migrate data and settings from your current NAS to another NAS model with minimal disruptions

by installing all the hard drives from the source NAS to the destination NAS. RAID configuration and other

settings are retained on the destination NAS after migration.

NAS migration requirements

You can only migrate drives to specific NAS models, depending on your source NAS. For the list of NAS

models compatible with direct NAS migration, see

https://www.qnap.com/go/nas-migration

Your device must meet the following requirements:

• QTS NAS supports several types of NAS migration:

• ARM NAS to an ARM NAS

• x86 NAS to an x86 NAS

• ARM NAS to an x86 NAS

Note

You cannot migrate from an x86 NAS to an ARM NAS.

• The destination NAS must run on the same QTS version as the source NAS (or later).

Important

Due to incompatibilities in file system, system migration between QTS NAS and QuTS hero NAS

is not supported.

Warning

Migrating drives between QTS NAS and QuTS hero NAS can cause data corruption.

• The destination NAS must have sufficient free drive bays to accommodate all the drives that you are

migrating from the source NAS.

For NAS models that do not support NAS migration, you can migrate existing data using HBS 3. For details,

see

Migrating NAS data using HBS 3

Status and setting changes after NAS migration

The status of NAS data and settings varies after migration.

Data and Settings

After NAS Migration

Registered myQNAPcloud name

Your registered myQNAPcloud name is not migrated.

Encrypted disk volumes

If the NAS does not support file system encryption, encrypted disk

volumes are not migrated.

Warning

To prevent data loss, back up and save the encryption

keys of encrypted disk volumes in a safe place. You can

also choose to decrypt disk volumes before migration.

TS-AI642 User Guide

NAS Migration

Содержание TS-AI642































































Результаты поиска

Содержание TS-AI642

Отзывы:

Похожие инструкции для TS-AI642

Бренды по названию

Популярные бренды

QNAP TS-AI642, Руководство пользователя

Результаты поиска

Содержание TS-AI642

Отзывы:

Похожие инструкции для TS-AI642

Бренды по названию

Популярные бренды