QNAP TS-AI642 Скачать руководство пользователя страница 42

Страница: 42 / 62

USB One Touch Copy LED

Status

Description

Flashes blue every 0.5

seconds

• A USB device connected to the USB One Touch Copy port is detected.

• A USB device connected to the front USB port is being removed from the

device.

• A USB device connected to the front USB port is being accessed.

Blue

A USB device is detected in the front USB port.

Off

The NAS has finished copying data to or from the USB device connected to the

front USB port.

Audio alerts

Duration

Frequency

Description

Short beep (0.5 seconds) 1

• The NAS is starting up.

• When the reset button is pressed for 3 seconds,

the NAS resets configurations.

• When the reset button is pressed for 15 seconds,

the NAS resets configurations and reboots.

• The operating system was updated.

• The NAS data cannot be copied to the external

storage device connected to the USB One Touch

Copy port.

Long beep (1.5 seconds)

3 (every 5 minutes)

• A system fan is not functioning.

• A fan module has been removed.

• A disk volume is about to reach its full capacity.

• A disk volume has reached its full capacity.

• The drives are in degraded mode.

• A drive is rebuilding.

• A drive is plugged in or out.

• The NAS was powered off by force shutdown

(hardware shutdown).

• The NAS was powered on successfully and is

ready.

TS-AI642 User Guide

Basic Operations

Содержание TS-AI642































































Результаты поиска

Содержание TS-AI642

Отзывы:

Похожие инструкции для TS-AI642

Бренды по названию

Популярные бренды

QNAP TS-AI642, Руководство пользователя

Результаты поиска

Содержание TS-AI642

Отзывы:

Похожие инструкции для TS-AI642

Бренды по названию

Популярные бренды