QNAP TS-464eU Скачать руководство пользователя страница 50

Страница: 50 / 70

Duration

Frequency

Description

Long beep (1.5 seconds)

3 (every 5 minutes)

• A power error occurred.

• The system fan is not functioning.

• The fan module has been removed.

• The NAS data cannot be copied to the external

storage device connected to the front USB port.

• The storage pool is about to reach full capacity.

• The storage pool has reached full capacity.

• A storage pool status error occurred.

• The disk volume is about to reach its full

capacity.

• The disk volume has reached its full capacity.

• The drives are in degraded mode.

• The drive is rebuilding.

• A volume status error occurred.

• A drive is plugged in or out.

• The NAS is powering off.

• The NAS was powered off by force shutdown

(hardware shutdown).

• The NAS was powered on successfully and is

ready.

Long and short beeps

1 long and 2 short beeps The JBOD expansion unit has been removed.

TS-x64eU User Guide

Basic Operations

Содержание TS-464eU







































































Результаты поиска

Содержание TS-464eU

Отзывы:

Похожие инструкции для TS-464eU

Бренды по названию

Популярные бренды

QNAP TS-464eU, Руководство пользователя

Результаты поиска

Содержание TS-464eU

Отзывы:

Похожие инструкции для TS-464eU

Бренды по названию

Популярные бренды