QNAP TS-464eU Скачать руководство пользователя страница 48

Страница: 48 / 70

LED

Status

Description

System Status Flashes green and red

alternately every 0.5 seconds

• The drive is being formatted.

• The device is being initialized.

• The operating system is being updated.

• RAID rebuilding is in progress.

• Online RAID Capacity Expansion is in progress.

• Online RAID Level Migration is in progress.

• The firmware is being updated.

Important

When updating the firmware, do not remove

the power cord or USB cable, and do not

force-exit the application.

Red

• The drive is invalid.

• The disk volume has reached its full capacity.

• The disk volume is about to reach its full capacity.

• The system fan is not functioning.

• An error occurred when accessing (read/write) the data.

• A bad sector is detected on the hard drive.

• The device is in degraded read-only mode (two member

drives failed in RAID 5 or RAID 6 but the data can still be

read).

• A hardware self-test error occurred.

Flashes red every 0.5 seconds The device is in degraded mode (one member drive failed in

RAID 1, RAID 5, or RAID 6).

Flashes green every 0.5

seconds

• The device is starting up.

• The device is not configured.

• A drive is not formatted.

Green

The device is ready.

Off

• All drives are in standby mode.

• The device is powered off.

LAN

Orange

The network connection is operating.

Flashes orange

The device is being accessed from the network.

Off

The device is not connected to a network.

2.5 Gigabit

Ethernet

speed

Green

The network connection is operating at 2.5 Gbps.

Orange

• The network connection is operating at 1 Gbps.

• The network connection is operating at 100 Mbps.

Off

The network connection is operating at 10 Mbps.

TS-x64eU User Guide

Basic Operations

Содержание TS-464eU







































































Результаты поиска

Содержание TS-464eU

Отзывы:

Похожие инструкции для TS-464eU

Бренды по названию

Популярные бренды

QNAP TS-464eU, Руководство пользователя

Результаты поиска

Содержание TS-464eU

Отзывы:

Похожие инструкции для TS-464eU

Бренды по названию

Популярные бренды