QNAP TS-332X Скачать руководство пользователя

Страница: 41 / 55

For details on configuring USB One Touch Copy, see the QTS User Guide.

LEDs

LEDs indicate system status and related information when the NAS is powered on. The following LED
information applies only when the drive is correctly installed and when the NAS is connected to the network.

For details on the location of the LEDs, see

Components

LED

Status

Description

System Status

Flashes green and red
alternately every 0.5
seconds

• The drive is being formatted.

• The NAS is being initialized.

• The operating system is being updated.

• RAID rebuilding is in progress.

• Online RAID Capacity Expansion is in progress.

• Online RAID Level Migration is in progress.

Red

• The drive is invalid.

• The disk volume has reached its full capacity.

• The disk volume is about to reach its full capacity.

• The system fan is not functioning.

• A read/write error occurred while accessing data.

• A bad sector is detected on the hard drive.

• The NAS is in degraded read-only mode (two member

drives failed in RAID 5 or RAID 6 but the data can still
be read).

• Hardware self-test error

Flashes red every 0.5
seconds

The NAS is in degraded mode (one member drive failed in
RAID 1, RAID 5, or RAID 6).

Flashes green every 0.5
seconds

• The NAS is not configured.

• A drive is not formatted.

Green

• The NAS is starting up.

• The NAS is ready.

Off

All drives are in standby mode.

LAN

Orange

A read/write error occurred while another device is
accessing data.

Flashes orange

The NAS is being accessed from the network.

Drive

Flashes red

The data is being accessed and a read/write error occurs
during the process.

Red

A drive read/write error occurred.

Flashes green

The data is being accessed.

Green

The drive can be accessed.

TS-332X User Guide

Basic Operations

Содержание TS-332X
























































Результаты поиска

Содержание TS-332X

Отзывы:

Похожие инструкции для TS-332X

Бренды по названию

Популярные бренды

QNAP TS-332X, Руководство пользователя

Результаты поиска

Содержание TS-332X

Отзывы:

Похожие инструкции для TS-332X

Бренды по названию

Популярные бренды