QNAP TS-253Be Скачать руководство пользователя

Страница: 32 / 52

Method

Description

Requirements

Cloud installation

If the NAS is connected to the internet,
you can do the following:

• Scan the QR code on the NAS.

• Log into your myQNAPcloud account.

• Use CloudLink to remotely access

your NAS.

• Complete the steps in the Smart

Installation Guide wizard.

For details, see

Installing QTS Using the

Cloud Key

• Computer or mobile device

• Network cable

• myQNAPcloud account

• CloudKey

Local installation

If the NAS supports HDMI output, you can
do the following:

• Connect the NAS to the required

hardware.

• Complete the steps in the Smart

Installation Guide wizard.

For details, see

Installing QTS Using an

HDMI Connection

• Monitor

• HDMI cable

• USB keyboard or remote control (not

available on all models)

Installing QTS Using Qfinder Pro

Warning

Installing QTS deletes all data on the drives. Back up your data before proceeding.

Power on the NAS.

Connect the NAS to your local area network.

Run Qfinder Pro on a computer that is connected to the same local area network.

Note

To download Qfinder Pro, go to

https://www.qnap.com/utilities

Locate the NAS in the list and then double-click the name or IP address.
The

Smart Installation Guide

opens in the default web browser.

Click

Start Smart Installation Guide

Specify the following information.

•

NAS name

: Specify a name with 1 to 14 characters. The name supports letters (A to Z, a to z),

numbers (0 to 9), and hyphens (-), but cannot end with a hyphen.

•

Password

: Specify an administrator password with 1 to 64 characters. The password supports all

ASCII characters.

Click

Next

Specify the time zone, date, and time.

TS-x53Be User Guide

Installation and Configuration

Содержание TS-253Be





















































Результаты поиска

Содержание TS-253Be

Отзывы:

Похожие инструкции для TS-253Be

Бренды по названию

Популярные бренды

QNAP TS-253Be, Руководство пользователя

Результаты поиска

Содержание TS-253Be

Отзывы:

Похожие инструкции для TS-253Be

Бренды по названию

Популярные бренды