QNAP TS-110, Руководство пользователя программного обеспечения

Страница: 84 / 369

84
4.2.5.3 Adv anced ACL
Note : The following information only applies to ARM-based NAS models with firmware
version 3.3.0 or la te r and x86-based NAS models running firmware version 3.2.0 or
la te r .
You can create a LUN masking policy to configure permissions of iSCSI initiators which
attempt to access the LUN mapped to the iSCSI targets on the NAS. To use this
feature, click "Add a Policy" under "Advanced ACL".
Enter the policy name, the initiator IQN, and assign access rights for each LUN on the
NAS.
Read-only: The connected initiator can only read the data from the LUN.
Read/Write: The connected initiator has read and write access right to the LUN.
Deny Access: The LUN is invisible to the connected initiator.
If no LUN masking policy is specified for a connected iSCSI initiator, the default policy
(Read/Write) will be applied. You can click "Edit" to edit the default policy.
Note : Make sure you have created at least one LUN on the NAS before editing the
default LUN policy.
H int: H ow do I find the initia tor IQ N?
Start the Microsoft iSCSI initiator and click "General". You will find the IQN of the
initiator.