background image

END OF TERMS AND CONDITIONS

FCC Notice

FCC Class A Notice

 This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1.

This device may not cause harmful interference.

2.

This device must accept any interference received, including interference that may cause undesired
operation.

Note

This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case the user will be
required to correct the interference at his own expense.

Important

Any modifications made to this device that are not approved by QNAP Systems, Inc. may
void the authority granted to the user by the FCC to operate this equipment.

CE Notice

 This QNAP NAS complies with CE Compliance Class A.

SJ/T 11364-2006

 

本产品符合中国

RoHS

标准。以下表格标示此产品中某有毒物质的含量符合中国

RoHS

标准规定的限量要求。

本产品上会附有”环境友好使用期限”的标签,此期限是估算这些物质”不会有泄漏或突变”的年限。本产品
可能包含有较短的环境友好使用期限的可替换元件,像是电池或灯管,这些元件将会单独标示出来。

QNAP External RAID Enclosure User Guide

Notices   

42

Содержание TR-004U













































Отзывы: