background image

at no further charge. You need not require recipients to copy the Corresponding Source along

with the object code. If the place to copy the object code is a network server, the Corresponding

Source may be on a different server (operated by you or a third party) that supports equivalent

copying facilities, provided you maintain clear directions next to the object code saying where to

find the Corresponding Source. Regardless of what server hosts the Corresponding Source, you

remain obligated to ensure that it is available for as long as needed to satisfy these requirements.

e. Convey the object code using peer-to-peer transmission, provided you inform other peers where

the object code and Corresponding Source of the work are being offered to the general public at

no charge under subsection 6d.

A separable portion of the object code, whose source code is excluded from the Corresponding

Source as a System Library, need not be included in conveying the object code work.

A “User Product” is either (1) a “consumer product”, which means any tangible personal property

which is normally used for personal, family, or household purposes, or (2) anything designed or

sold for incorporation into a dwelling. In determining whether a product is a consumer product,

doubtful cases shall be resolved in favor of coverage. For a particular product received by a

particular user, “normally used” refers to a typical or common use of that class of product,

regardless of the status of the particular user or of the way in which the particular user actually

uses, or expects or is expected to use, the product. A product is a consumer product regardless

of whether the product has substantial commercial, industrial or non-consumer uses, unless such

uses represent the only significant mode of use of the product.

“Installation Information” for a User Product means any methods, procedures, authorization keys,

or other information required to install and execute modified versions of a covered work in that

User Product from a modified version of its Corresponding Source. The information must suffice

to ensure that the continued functioning of the modified object code is in no case prevented or

interfered with solely because modification has been made.

If you convey an object code work under this section in, or with, or specifically for use in, a User

Product, and the conveying occurs as part of a transaction in which the right of possession and

use of the User Product is transferred to the recipient in perpetuity or for a fixed term (regardless

of how the transaction is characterized), the Corresponding Source conveyed under this section

must be accompanied by the Installation Information. But this requirement does not apply if

neither you nor any third party retains the ability to install modified object code on the User

Product (for example, the work has been installed in ROM).

The requirement to provide Installation Information does not include a requirement to continue

to provide support service, warranty, or updates for a work that has been modified or installed

by the recipient, or for the User Product in which it has been modified or installed. Access

to a network may be denied when the modification itself materially and adversely affects the

operation of the network or violates the rules and protocols for communication across the

network.

Corresponding Source conveyed, and Installation Information provided, in accord with this

section must be in a format that is publicly documented (and with an implementation available

to the public in source code form), and must require no special password or key for unpacking,

reading or copying.

8. Additional Terms.

“Additional permissions” are terms that supplement the terms of this License by making exceptions

from one or more of its conditions. Additional permissions that are applicable to the entire Program

shall be treated as though they were included in this License, to the extent that they are valid under

applicable law. If additional permissions apply only to part of the Program, that part may be used

separately under those permissions, but the entire Program remains governed by this License without

regard to the additional permissions.

When you convey a copy of a covered work, you may at your option remove any additional permissions

from that copy, or from any part of it. (Additional permissions may be written to require their own

removal in certain cases when you modify the work.) You may place additional permissions on

material, added by you to a covered work, for which you have or can give appropriate copyright

permission.

QNAP External RAID Enclosure User Guide

Notices   

39

Содержание TR-004-US















































Отзывы: