Note
The JBOD enclosure may take up to 30 seconds to detect the new drive.
Installing Solid-State Drives on 3.5-inch Trays
Warning
Observe electrostatic discharge (ESD) procedures to avoid damage to components.
1.
Power off the JBOD enclosure.
2.
Remove a drive tray.
a.
Pull the handle to release the tray.
b.
Pull the tray out.
3.
Install a drive on the tray.
a.
Place the drive on the tray so that the holes on the bottom of the drive are aligned with the holes
on the bottom of the tray.
b.
Attach the screws.
QNAP JBOD Enclosure - TL-R400S/TL-R1200S-RP User Guide
Hardware Installation
16
