QNAP TDS-h2489FU Скачать руководство пользователя страница 11

Страница: 11 / 63

LED

Status

Description

System status

Flashes green and red alternately

every 0.5 seconds

• The drive is being formatted.

• The device is being initialized.

• The operating system is being

updated.

• RAID rebuilding is in progress.

• Online RAID Capacity

Expansion is in progress.

• Online RAID Level Migration is

in progress.

Green

The device is ready.

Flashes green every 0.5 seconds

• The device is not configured.

• A drive is not formatted.

Red

• The drive is invalid.

• The disk volume has reached

its full capacity.

• The disk volume is about to

reach its full capacity.

• The system fan is not

functioning.

• An error occurred when

accessing (read/write) the

data.

• A bad sector is detected on

the hard drive.

• The device is in degraded

read-only mode (two member

drives failed in RAID 5 or RAID

6 but the data can still be

read).

• A hardware self-test error

occurred.

Flashes red every 0.5 seconds

The device is in degraded mode

(one member drive failed in RAID

1, RAID 5, or RAID 6).

Off

• The device is powered off.

• All drives are in standby mode.

Front Panel OLED Display

The OLED display shows the status of the nodes and main components.

For details on the location of the OLED display, see

Front Panel

TDS-h2489FU User Guide

Product Overview

Содержание TDS-h2489FU
































































Результаты поиска

Содержание TDS-h2489FU

Отзывы:

Похожие инструкции для TDS-h2489FU

Бренды по названию

Популярные бренды

QNAP TDS-h2489FU, Руководство пользователя

Результаты поиска

Содержание TDS-h2489FU

Отзывы:

Похожие инструкции для TDS-h2489FU

Бренды по названию

Популярные бренды