Kimberley MONACO-MKII KRB60EP Скачать руководство пользователя

Страница: 1 / 4

Measure and mark the location where the inner
runners will be installed.

INSTALLATION INSTRUCTIONS
MODEL: MONACO-MKII KRB60EP

Ph: +(61) 3 9768 5777
Fax: +(61) 3 9768 5788
Email: [email protected]

kimprod.com.au

Manufactured by:
Kimberley Products Pty. Ltd.
5 Abbotts Rd, Dandenong Sth
Victoria 3175, Australia

Once mounting positions have been accurately
marked, use two self tapping screws to secure in
each runner.

BEFORE YOU START

Model KRB60EP suits installation to cabinets with
450mm standard carcass. (418mm Internal).

224

185

395

Preassemble runner cover to
hamper frame. Gently tighten
as you may need to make
further minor adjustments
before completion.

Lid support bracket
(See assembled example in Step 3)

Lid support bracket

- Screws (8g x 5/8 csk) x 12
- Screws (M5 x 12mm) x 8
TOOLS REQUIRED
- Philips head screwdriver
- Drill & 2mm Drill bit

ASSEMBLY KIT

D/N: SKRB60EP-160817

Содержание MONACO-MKII KRB60EP

Страница 2: ...e back until you hear it click in place Move bin frame in and out to ensure the runners have a smooth movement If the movement isn t as desired then adjust before proceeding to the next step 5 Once you are satisfied with the runner movement tighten all screws as shown Note At this point fit the lid between the support brackets Shown step 3 ...

Страница 3: ...e C Use a Phillips screw driver to secure fixing bracket to door Note Do not drill through B C 6 Check and mark the height of the screw positions in the inner cupboard door as shown figure B Use a 10 mm drill bit and drill 10mm deep DOOR 16 15 5 15 0 16 32 47 5 409 5 32 31 5 31 5 409 5 ...

Страница 4: ...ckets to the runner slots Once in place push door and runners back inside the cabinet until you hear the runners click in place For further adjustments refer to smooth runner instruction sheet 8 MONACO MK II INSTALLATION INSTRUCTIONS ...