4. Basic Operations
This chapter describes basic NAS operations.
Power button
Operation
User Action
Result
Power on
Press the button once.
The device powers on.
Power off
Press and hold the button for 3 seconds. The device powers off.
Force power off
Press and hold the button for 10
seconds.
The device powers off.
Important
Use this method only when
the device is unresponsive.
Reset button
Operation
User Action
Result
Basic system
reset
Press and hold
the button for 3
seconds.
The following settings are reset to default:
• System administrator password: The default password is
the first MAC address in uppercase letters without special
characters. For example, if the first MAC address is 00-08-9B-
F6-15-75, then the admin password would be 00089BF61575.
Tip
You can find the first MAC address with Qfinder Pro
or attached to a label on the device listed as MAC1.
• The admin account is automatically enabled.
• TCP/IP configuration:
• Obtain IP address settings automatically via DHCP
• Disable jumbo frames
• If port trunking is enabled (multi-LAN models only), the port
trunking mode is reset to “Active Backup (Failover)”.
• System port: 8080 (system service port)
• Security level: Low (Allow all connections)
• LCD panel password: (blank)
• VLAN: Disabled
Advanced system
reset
Press and hold
the button for 10
seconds.
The default factory settings are restored.
To retrieve old data after an advanced system reset, recreate the
previous folder structure on the NAS.
TBS-h574TX User Guide
Basic Operations
32
