• The QNAP HS-M2SSD-07 heatsink is recommended.
• Heatsinks must not exceed a height of 4.5 mm.
a. Locate the controller on the M.2 SSD.
Note
The controller location varies depending on the model and manufacturer of the M.2 SSD.
For details, refer to the documentation or contact the manufacturer.
b. Remove the protective film from the heatsink.
c. Install the heatsink on the controller.
4. Optional: Install one or more thermal pads on the drive tray.
Note
• Thermal pads are not included with the NAS and must be purchased separately. For details,
contact an authorized reseller or go to
• The QNAP TPAD-M2SSD-04 thermal pads are recommended. The TPAD-M2SSD-04 includes
thick and thin thermal pads for installing single-sided and double-sided SSDs.
Important
Do not install thermal pads directly on the SSD. The M.2 SSD adapter does not have sufficient
space to accommodate an SSD with thermal pads attached. Install thermal pads on the drive
tray in the area unobstructed by the adapter.
a. Install a thick thermal pad on the drive tray.
TBS-h574TX User Guide
Installation and Configuration
13
