47
6.
Grasp the edge of the expansion card. Align the notch on the gold edge of the card with
the notch in the PCIe slot. Insert the network expansion card to the PCIe slot until it
cannot go any further.
7.
Fasten the screws.
8.
Close the case cover and fasten the screws. Connect the power adaptor and cables to
the NAS.
9.
To check that the network expansion is recognized by the NAS, power up the NAS and
login the web interface as an administrator. Go to “System Administration” >
“Network” > “TCP/IP” and check the total number of network interfaces.
Содержание HS-251
Страница 1: ...2015 01 14 QNAP Turbo NAS Hardware User Manual 2015 QNAP Systems Inc All Rights Reserved...
Страница 40: ...40 4 Remove the case cover of the NAS gently For TVS 463 only Unscrew and remove the power supply unit...
Страница 63: ...63 2 Hold the black handler and press and hold the green button firmly 3 Unplug the failed power supply...