46
6.3
TS-870U-RP, TS-1270U-RP
1.
Turn off the NAS. Disconnect the power adaptor, network cable(s), and any other
connectors or cables from the NAS.
2.
Before installing the network expansion card, put on an antistatic wrist strap to
prevent electrostatic discharge. The crocodile clip should be connected to the ground.
3.
Loosen the two screws on the rear of the NAS.
4.
Hold the notch at the edge of the top cover. Remove the top cover in both hands.
5.
Loosen the screw and remove the expansion slot cover.
Содержание HS-251
Страница 1: ...2015 01 14 QNAP Turbo NAS Hardware User Manual 2015 QNAP Systems Inc All Rights Reserved...
Страница 40: ...40 4 Remove the case cover of the NAS gently For TVS 463 only Unscrew and remove the power supply unit...
Страница 63: ...63 2 Hold the black handler and press and hold the green button firmly 3 Unplug the failed power supply...