QMS QDOC, Руководство пользователя

Страница: 87 / 172

&RQILJXULQJWKH
3ULQWHUWR
&UHDWH%RRNOHWV
:RUNLQJ:LWK%RRNOHWV
select Letter 8.5 x 11. If your document was created using tabloid
size (11"x17"), then you should select 11x17 here and then select
the Page Scaling check box.
» Note: Remember, a physical paper size of 11" x 17" produces
booklets 8.5" x 11". A physical size of 8.5" x 11" produces
booklets 5.5" x 8.5". If the booklet page must look exactly as it is
created in the application, then you need to set the paper size
accordingly. However, with the Page Scaling option, you can
create the original using a different paper size. Be aware that
when using Page Scaling, fonts and graphics will appear smaller
than in the original.
10 Under Page Layout, identify the appropriate Left, Right, Top
and Bottom margins.
These are margins imposed on the physical page over and above
any margins that may be specified in the application. These mar-
gins are measured from the allowable imageable area for left, top,
right and bottom. The units are in 0.01 of a centipoint (1/7200").
» Note: These margins are absolute and are not affected by the
page scaling selection.
11 For Page Orientation, select Landscape.
» Note: Landscape should always be used for normal booklet
printing.
12 Under Page Range, specify the page number of the First and
Last page in your file that you want to include in your
booklet.
» Note: Under normal operation, no changes should be necessary.
The default setting, 32766, refers to the last page of the
document.
13 For the Border Thickness, enter the width of a border if you
want one.
» Note: This option allows you to add a border around each logical
page. The outer edge of the border is placed inside the margin
settings. The units are in 0.01 of a centipoint (1/7200").