QMS Magicolor 6100, Руководство по эксплуатации

Страница: 39 / 224

4
%& $
When toner is low, it’s sometimes helpful to take the cartridge out of the printer and
redistribute the toner by gently rocking the cartridge horizontally side to side (as you
do for a new cartridge) five or six times. Then reinstall the cartridge. If the
x
Toner
Low
message remains in the message window after you redistribute the toner, you
must replace the toner cartridge.
The printer stops approximately 100 pages after detecting that toner in a cartridge is
low.
x
toner Empty
displays in the message window. If the user changes the toner
before it is empty and does not reset the counter (Operator Control/Consumables/
Item Replaced), the consumable status will be incorrect.
,5**
Refilled toner cartridges may produce variations in toner quality and reliability and
may reduce the print quality of your documents. Any damage to the printer caused by
refilled toner cartridge use will not be covered by warranty.
Choosing the right consumables for your
magicolor
6100 printer will not only increase
its reliability and performance, but also minimize the risk of damage. Only QMS toner
cartridges are designed to meet the exact specifications of your QMS printer, guaran-
teeing maximum performance, efficiency, and long life.
In the US, call 1 (800) 523-2696 for information on ordering toner cartridges and other
consumables. In other countries, see appendix A, “QMS Customer Support,” for the
telephone number of the QMS office nearest you.
Keep toner cartridges in their packaging until you’re ready to install them.
Store toner cartridges in a cool, dry location away from sunlight (due to heat). The
maximum storage temperature is 95
°
F (35
°
C) and the maximum storage humid-
ity is 80% without condensation.
Keep toner cartridges level during storage. Do not stand or store cartridge on their
ends or turn upside down; the toner inside the cartridges may become caked or
unequally distributed.