QMS CF 2215, Руководство пользователя

Страница: 31 / 50

Using the
Emulation
2-17 Installation
Slash in Zero
Prints zeros with or without slashes.
Vertical MAG COR
Sets the vertical MAGNUM correction.
» Note:
This option is provided for users of the Code V Version I
programming language. If you modified programs that utilized rotated
MAGNUM characters in Code V Version I to compensate for
elongated characters caused by the 60 x 72 dot matrix used by
impact printers, then set this option to On.
In Code V version II, there is no elongating of rotated MAGNUM char-
acters. Set this option to On if you wish to send your existing Code V
Version I programs to the printer unchanged. If you don’t have Code
V Version I programs, or if you didn’t encounter elongated MAGNUM
characters, then leave this option set to Off.
Default One Character
Notes All characters are absorbed until line termination is set to
one or two lines.
Menu Administration/Emulations/MAGNUM/Code V Setup/Slash In 0
Choices Enable—Prints a slash in the zero (
ø
).
Disable—Prints a zero with no slash (0).
Default Enable
Menu Administration/Emulations/MAGNUM/Code V Setup/Vertical MAG COR
Choices On—Adjusts the dots per inch to match the printer.
Off—Doesn’t adjust the dots per inch.
Default Off