QMS CF 2215, Руководство пользователя

Страница: 20 / 50

Configuring
Printer Memory
QMS MAGNUM Emulation User's Guide 2-6
4 When you have allocated at least 2 MB (2048 KB) to Adminis-
tration/Memory/K Mem Emulation, save your changes and
press the Menu key until the Online or Ready indicator
lights.
The printer automatically restarts after you save changes and exit
from the configuration menu. It may take a few minutes before it
returns to
IDLE
.
5 Print a start-up page or an advanced status page to confirm
the memory reallocaton.
See your printer documentation for information on printing either
of these pages.
6 Reconfigure the other configuration settings, if necessary
for your environment.
Keep in mind that K Mem Emulation must be a minimum of 2 MB
(2048 KB).
Example
» Note: This is an example of the control panel messages on a QMS
1660E Print System. The messages on a QMS 1060E Print System
are slightly different. See chapter 4, the “Accessing the Configuration
Menu” section of the Reference in the QMS 1060E printer
documentation, for more detailed information. In this example, you
start accessing menu options at the Administration menu.
Use this key... to... The message window
reads...
Select Advance to the Administration/
Memory menu.
MEMORY
K MEM FOR SPOOL
Next Advance to the K Mem Emulation
selection.
MEMORY
K MEM EMULATION
Select Access the K Mem Emulation
selection and displays a 01356
memory setting with the first digit
flashing. Keep 0 as the first digit of
this number.
K MEM EMULATION
01356