QMS CF 2215, Руководство пользователя

Страница: 23 / 50

Using the
Emulation
2-9 Installation
The MAGNUM options (described in the following sections) select the
default values used by the emulation when interpreting the various
document processing features of your QMS Crown printer. See your
printer documentation for information on using the control panel and
configuration menu.
QMS recommends that you set the emulation for the desired interface
to MAGNUM via the Administration/Communications/
interface /Emu-
lation setting (where interface is your communications interface).
» Note: If ESP is desired for the interface, then set the Administration/
Emulation/ESP Default setting to MAGNUM.
Setting Default Font Parameters
Default Font
Use the Administration/Emulations/MAGNUM/Default Font menu to
set the default font for the MAGNUM emulation. This font is used if
the printer doesn’t receive a font selection command in the data
stream. See the
Code V Version II Programming Language Manual
for more information about selecting a default font.