QMS 3260, Руководство по началу работы

Страница: 31 / 86

"
:+74
9" $
A start-up page should print, and Serial RS-232C should be listed as an interface.
If it doesn’t, refer to chapter 5, “Troubleshooting Printer Problems,” of the
Opera-
tion manual.
4 Test the communication between the printer and the computer.
You can do this by sending a file from one of your applications, or refer to chapter
5, “Troubleshooting Printer Problems,” of the
Operation manual.
4*.
The QMS CrownNet Ethernet interface combines hardware and host software to allow
printer connection to an Ethernet network. CrownNet supports the following:
The instructions given in this section are the minimum steps needed to get your printer
up and printing. For complete installation information refer to the QMS
CrownNet
Setup Guide on the QMS Software Utilities CD-ROM . For information on configuring
the CrownNet interface and using the CrownNet software (CrownAdmin, CrownAdmin,
CrownNet Manager, and the CrownNet Print Utility for Windows), refer to the QMS
CrownNet System Administrator’s Guide on the QMS Software Utilities CD-ROM .
$ &
The printer provides a twisted-pair (10BaseT/100BaseTX) Ethernet interface.
Twisted-pair Ethernet connections use RJ45 connectors.
Operating System Protocol
Macintosh EtherTalk
LAN Manager/LAN Server NetBIOS/NetBEUI
NetWare IPX/SPX
UNIX or OS/2 TCP/IP
Windows 3.1/Windows 95/98 TCP/IP/NetBIOS/NetBEUI
Windows NT TCP/IP/NetBIOS/NetBEUI