QMS 2060, Справочник

Страница: 40 / 210

&RQILJXUDWLRQ
4063ULQW6\VWHP5HIHUHQFH
8VLQJWKH&RQWURO3DQHO
Your printer is configured at the factory for most typical printing envi-
ronments, so most users don’t have to use the control panel often.
However, if you do need to change a printer setting for all print jobs
(not just on a per-job basis), you can do so through the control panel.
If you’re working in a shared printing environment, your system
administrator should be the only person to make changes through the
printer’s control panel.
8VLQJD5HPRWH&RQVROH
Many of the configuration choices that can be made at the control
panel can also be made via a Remote Console session from QMS
CrownAdmin. You can run Remote Console via Telnet in an UNIX
environment. To avoid confusion in a shared printing environment,
only the system administrator should make configuration changes.
See the QMS CrownAdmin on-line help and the QMS Remote Con-
sole manual (in Adobe Acrobat format on the QMS Software Utilities
CD-ROM) for information on using Remote Console.
» Note: If a remote console has the printer off line, pressing the Online
key will not take effect until the console puts the printer back on line.
&RQILJXUDWLRQ0HQX
The printer’s configuration menu allows you to change the default
printer configuration settings. Any changes made to the configuration
will reside as new default settings and affect all subsequent print jobs.
» Note: Some changes take effect immediately and others take effect
after the printer is rebooted.