QMS 2060, Справочник

Страница: 121 / 210

$FFRXQWLQJ
$GGLWLRQDO7HFKQLFDO,QIRUPDWLRQ
&RS\$FFRXQWLQJ)RVW
Accounting files should be transferred to your host computer periodi-
cally to keep the printer from being overloaded with data and to allow
for easy analysis of data.
8VLQJWKH406&URZQ3ULQWHU$XGLWRU&3$8WLOLW\
You can access the accounting files with the Windows-based QMS
Crown Printer Auditor (CPA) utility on the
QMS Software Utilities CD-
ROM. Refer to the CPA on-line help for more information.
8VLQJWKH)LOH7UDQVIHU3URWRFRO)73
» Note: FTP works only when the printer is on line and the message
window displays
IDLE
. Use the ls command in the SYS:/ADMIN
directory to see which accounting files you are going to retrieve.
The ls command is issued from a remote terminal. If multiple Job
Accounting files are used, each of the ACCx.JOB files should be
copied. (x is the number of each subsequent Job Accounting file.)
Use File Transfer Protocol (ftp) on the host, if a TCP/IP connection is
available to the printer, to copy the files from the printer’s hard disk to
the host as follows:
1 Type
ftp printer-name
(where
printer-name
is either the
IP address of the printer or its corresponding host name).
43: The File field indicates the
maximum character length of
the File Name field in the Job
Accounting file. File names are
assigned with QMS DOC. 43: 31 The File Name
can be up to 31
characters
44: The Charge field indicates the
maximum character length of
the Charge Number field in the
Job Accounting file. Charge
numbers are assigned with
QMS DOC. 44: 31 The Charge field
can be up to 31
characters