QMS 2060, Руководство по установке

Страница: 9 / 52

Unpack the
Printer
5 QMS 2060 WX Print System Setup Guide
Unpack the Printer
The packing materials that protect your printer during shipment—
cardboard, polystyrene, tape, and shipping spacers—must be
removed before you can use the printer.
Use the following procedure to unpack the printer. To ensure that your
printer was not damaged during shipment, follow the entire procedure.
» Note: Save the packing materials in case you ever have to move or
ship the printer to a new location.
s
Caution:
To avoid damaging the printer, remove all packing materials
before turning it on.
1 Lift off the box and remove everything except the printer
from the shipping carton.
Use the carrying grips on the bottom of the left and right sides of
the printer.
2 Lift the printer out of the shipping carton.
M
WARNING! The printer weighs about 53 lbs (24 kg). Don’t lift it by
yourself.
ACHTUNG! Der Drucker wiegt ca 24 kg; bitte versuchen Sie
niemals, das Gerät alleine anzuheben oder zu tragen.
3 Remove the protective plastic covering, and then remove
any tape and polystyrene from the printer body.
» Note:
Make sure all of the polystyrene is removed.
4 Remove the packing materials and tape from inside the
printer and cassette.
5 Slide the cassette into the printer.
6 Place the printer in its proper location.