QMS 2060, Руководство по установке, Страница: 37 / 52

Install a Network
Print Monitor
33 QMS 2060 WX Print System Setup Guide
8 Type the logical name for the port in the Port Name text box.
This is a descriptive identifier of the port (for example, QMS 2060
WX). Each port name must be unique. The maximum port name
is up to 128 characters. This name displays in the Print to: list box
of the Printer Properties dialog box in Print Manager.
If the port name exists already, the following message displays:
The port name
“
port_name
”
already exists on this
computer. Please choose another name
. You must
choose another Port Name.
» Note: On initial access to the Add QMS Port dialog box, whatever
you type in the Port Name text box is automatically copied to the
IP Address text box. The port name and IP address can be the
same or they can be different. However, If they are different, then
first click the cursor in the IP Address text box and type it. Then
click the cursor in the Port Name text box and type it.
9 Type the Internet Protocol Address for the port.
This address is either the host name or the dot notation identifier
of the network device.
If an invalid IP address (host name or dot notation identifier) is
given, the following message displays:
The port address
“
IP_Address
”
could not be resolved on this com-
puter
.
Accept it anyway?
Do one of the following:
a Select No, and type another valid IP address (this is what
QMS recommends).
b Select Yes, and add this address in the Network Host Name
file on your computer before you send any print jobs to the
port. If a print job is sent to the port before the address is
entered in the Network Host Name file, printing of the job fails.
Host Name A symbolic name that identifies a device. This name must
exist in your Network Host Name file.
Dot
Notation
Identifier A unique set of four numbers, separated by periods,
which identifies a device on the internet (for example
191.45.105.227).