QMS 1060, Руководство пользователя

Страница: 90 / 311

Interfaces
QMS 1060 Print System Reference 4-56
Def Job Prio
Allows you to specify which jobs are printed first, according to the
interface through which they are received, when jobs are received
simultaneously. In other words, you can give jobs received via the
LocalTalk interface priority over jobs received via the parallel and
serial interfaces.
Setting Parallel Interface Parameters
Use the Administration/Communications/Parallel menu to set the par-
allel interface values used for printer-host communications.
Mode
The Centronics IEEE 1284 parallel interface supports five modes of
operation: byte, compatibility, ECP (enhanced compatibility port),
Choices Normal—Enable standard, ASCII hex protocol. Data is
sent and received in ASCII format. This mode is
recommended if you do not print binary data. It was
designed for data in the printable ASCII range. Print jobs
can alter the PS protocol value through PostScript
operators.
Normal Fixed—Enable standard, ASCII hex protocol.
Print jobs cannot alter this value through PostScript
operators.
Binary—Enable binary communications protocol. Print
jobs can alter this value through PostScript operators.
Data in the printable ASCII range also prints.
Binary Fixed—Enable binary communications protocol.
Print jobs can not alter this value through PostScript
operators. Data in the printable ASCII range also prints.
Default Normal
Menu Administration/Communications/LocalTalk/Def Job Prio
Choices 001-100 (highest-lowest priority)
Default 001 (highest priority)