QMATIC Q-Entry SE, Руководство пользователя

Страница: 42 / 119

Q-
Entry SE User’s Guide
32 Q-MATIC AB 133.01A
[ESC]E
This is used as the end of a bar code. All bar codes except EAN 13 must end
with [ESC]E.
Example
Print the same Ticket Number as in the example above but use Code 39 instead
of EAN 13.
@h5@b3@c3#n@E
[ESC]F x
Specify the character set used by the Q-Entry SE Ticket Printer. The following
character sets are available.
1 Default Q-Entry character set.
2 Q-Matic SD set
3 ANSI
[ESC]G x
Select the font for the selected line. Note! The Control Code only affects one
line. The following fonts are available. Font 1 is the default font and will be used
if no other font is selected.
1 Q-MATIC Standard (6 x 10)
2 IBM PC Standard (6 x 10)
3 IBM PC Standard (8 x 14)
4 IBM PC Standard (6 x 8)
5 Times New Roman 16 x 28
[ESC]H x
Specify the height of the characters compared to the standard height for the
selected font.
Note! The Control Command only affects one line. The following
values are valid.
1 The font height is 1/8 of the normal height.
2 The font height is ¼ of the normal height.
3 The font height is ½ of the normal height.
4 The normal font height.
5 The font height is two times the normal height.
[ESC]I
Print with an inverted font on the selected line. The characters are white and the
background is coloured.
[ESC]L
Align the selected line to the left.
[ESC]M x
Specify the position of the centre line. The centre line specifies the centre of the
Ticket. The position is the number of pixels from the left of the Ticket. Normally