Qlogic StorageWorks MPX200, Руководство пользователя

Страница: 134 / 240

3–Configuring CHAP
Discovery Session —Bi-directional CHAP
3-2 ISR654601-00 D
Discovery Session—Bi-directional CHAP
Follow this procedure to configure a bi-directional (BiDi) CHAP used during a
discovery session.
To configure a BiDi CHAP in a discovery session:
1. On the router, follow these steps:
a. Enable CHAP on the port.
b. Create a secret (for example, secret_port).
c. Using the
set chap
command, choose the iSCSI node that
represents the GE port.
d. To find the iSCSI node name of the GE port, execute the
show
iscsi
command.
2. To add the initiator that is about to do discovery, execute the
initiator
add
command as follows:
a. Enable the CHAP for this initiator.
b. Create a secret (for example, secret_initiator ).
c. To update the CHAP settings of the initiator, execute the
set chap
command.
3. Go to the Microsoft iSCSI (MS) Initiator and follow these steps:
a. Click General .
b. Click Secret (in the middle of the window). If this is the first time you
are setting secrets, reset all secrets.
c. Type the secret ( secret_port ) that you created in Step 1 .
4. Click Discovery .
5. Click Add .
6. Type the address of the iSCSI port of the router.
7. Click Advanced .
8. Select Chap Login Information .
9. Type the secret ( secret_initiator ) you created in Step 2 into Target Secret .
10. Select Mutual Authentication .
11. Click OK .
12. Click OK .
The initiator completes the discovery.